Caterpillar forklifts of the DP60, DP70 models are diesel forklifts with the following weight characteristics:
Forklifts Caterpillar DP60 and Caterpillar DP70
rated load of 6000 kg;
loader weight without load, including battery weight 8715 kg;
weight load on the axis of the most loaded loader (front / rear) 13255 kg / 1460 kg;
weight load on the axle of the loader without additional load (front / rear) 4160 kg / 4555 kg.
Forklift Caterpillar DP70:
rated load capacity 7000 kg;
loader weight without load, including battery weight 9325 kg;
weight load on the axis of the maximum loaded loader (front / rear) 14660 kg / 1665 kg;
weight load on the axle of the loader without additional load (front / rear) 4050 kg / 5275 kg.
Caterpillar diesel loaders are characterized by such engine parameters as:
Engine Model S6S-T.
Rated power 69.9 kW.
Rated speed 2300 rpm.
The number of cylinders is 6.
The working volume is 4996 cm3.
Caterpillar diesel forklifts are available in the following sizes:
Sizes of a pitchfork (thickness / width / length) 60 mm / 150 mm / 1220 mm.
4A fork carriage.
The width of the fork carriage is 1780 mm.
Height with unfolded mast 5280 mm.
The height of the protective roof is 2420 mm.
Height with mast down 3070 mm.
The length to the pitchfork is 3590 mm and 3635 mm, respectively.
The height of the operator’s seat is 1350 mm.
The total width of 2175 mm.
The width of the working corridor with a pallet of 1000 mm / 1200 mm is 5095 mm and 5180 mm, respectively.
The width of the working corridor with a pallet of 800 mm / 1200 mm is 4895 mm and 4980 mm, respectively.
Maximum lifting height 4000 mm.
6 degrees forward;
12 degrees back.
The height of the towing unit is 485 mm.
Freewheel 200 mm.
The distance to the load is 585 mm.
The center of gravity is 600 mm.
The outer turning radius is 3310 mm and 3395 mm, respectively.
Caterpillar DP60 and DP70 forklift trucks have the following operational capabilities:
The speed of the trucks with maximum load is 23 km / h and 22 km / h, respectively, for each model.
Loader speed without load 27.5 km / h.
The pulling force of loaders with a load is 42800 N and 42700 N, respectively.
The pulling force of loaders without load is 28,700 N and 2,770 N, respectively.
440 mm / s for loaders with a load;
470 mm / s for no-load trucks.
Lowering speed 550 mm / s.
The overcome tilt of loaders with a load is 31% and 27%, respectively.
The overcome tilt of loaders without load is 29% and 27% respectively.
Characteristics of tires and wheels:
The presence of 4 front and 2 rear wheels.
Type of tires - pneumatic.
The tire size is 8.25x15-12PR.
Tread width 1650 mm.
Wheelbase 2300 mm.
Ground clearance in the center of the wheelbase 255 mm.
Ground clearance at the lowest point on the mast 140 mm.
Advantages of loaders:
the presence of a durable body;
high level of performance;
a powerful 6-cylinder engine designed to the highest standards;
long period of use;
maneuverability and ease of management;
accuracy and efficiency of operations;
small diameter steering wheel;
the presence of a vacuum brake booster for safety and braking performance;
accessibility of components and prostate maintenance;
wide range of lateral shift of a pitchfork;
fully enclosed cabin.
The Caterpillar DP60 and Caterpillar DP70 forklifts are quality, reliable and safe forklifts that receive only positive feedback. The price of these loaders is adapted to the prices of the modern market of the country, is minimal and affordable. You can buy or rent diesel loaders of the considered models using the websites of companies implementing Caterpillar equipment. Such sites are designed to provide a quick and inexpensive way to purchase goods.